Duke GES-102, Operator’S Manual With Illustrated Parts List, Page: 54 / 107

Soft Serve Freezer Model GES-102
44 184559
13 Routine Maintenance
(continued)
CAUTION
Make sure the freezer
is depressurized before
proceeding.
a. Remove cover, loosen swing clamp and
open shoe to gain access to the hose
cavity.
b. Remove mix transfer hose assembly.
c. Lay a towel on the cabinet base below the
MTS.
d. Using the spray bottle supplied, flush the
hose cavity and roller assembly.
e. Use a brush (supplied) to clean in between
rollers. Flush with sanitizer.
f. Wipe all surfaces with a clean dry cloth.
g. Remove and clean shoe. See figure 13-1.
AS NEEDED
(continued)
Figure 13-1
WEEKLY
1. Carefully inspect all parts for wear,
including seals, O-rings, mix transfer
tubes, and blades.
2. Replace as required.
Replace blades if worn 3/16” or more.
3. Check the shaft tang and drive
coupling for wear.
4. A worn coupling will have a nonparallel
shape on the drive opening.
LEFT SIDE THE SAME EXCEPT MIRRORED
ROLLER SHOE
BRUSH BETWEEN ROLLERS
GRADE LUBRICANT
SHOE PIVOT ARM
KNOB
LUBRICATE WITH FOOD
GRADE LUBRICANT
SWING CLAMP ARM
SHOE SWING CLAMP
O-RING
O-RING
WASHER
LUBRICATE WITH FOOD
PRESSURE RELIEF SPRING
RIGHT SIDE SHOWN
M02082