Duke DQ 957RMT, Operator’S Manual With Illustrated Parts List

Page: 37 / 83

Twin Twist Soft Serve Freezer Model 957RMT
184957 27
8 Assembly
(continued)
16. Check to ensure the transfer hose
is straight and centered on the roller
assembly by observing the locating
line. The line should be in the same
position at the inlet and outlet guides
of the roller bearing support, as shown
in figure 8-6.
18. Swing the shoe over hose and tighten
the swing clamp hand knob in place.
19. Insert the air tube into the retainer in
the back of the cabinet.
20. Insert the MTS cover over stud. Hose
clamps should be exposed. Tighten
cover knob. Hand tighten only.
21. Loop the braided hose towards you
and slide the hose over the cylinder
inlet tube. Tighten the clamp. Make
sure the braided hose is not twisting
transfer hose.
Important:
The MTS will not operate unless
the cover is installed and secured
by the hand knob.
Figure 8-6 MTS