Duke DQ 957RMT, Operator’S Manual With Illustrated Parts List

Page: 19 / 83

Twin Twist Soft Serve Freezer Model 957RMT
184957 9
1.) HEAD: Encloses the freezing cylinder
and provides an opening for product
to be dispensed. NOTE: Beater
motors will not operate with the head
removed from the freezer.
2.) SPIGOT - ASSEMBLY SIDE WITH
HANDLE (Stainless Steel): Seals
the product opening in the head when
closed. Allows product to flow when
open.
3.) O-RING - SPIGOT: Seals the spigot
in the head. Must be lubricated to seal
and slide properly.
4.) O-RING - SPIGOT EXTENSION:
Holds the extension on to the spigot.
5.) ROD - SPIGOT: Starts the freezer
when dispensing. Must be in place
before freezer will operate.
6.) KNOB-HAND: Secures the head to
the freezing cylinder.
7.) EXTENSION - SPIGOT: (Accessory)
Extends the product opening down to
shape the product as it is dispensed.
8.) O-RING - HEAD: Seals the head
to the freezing cylinder. Must be
lubricated.
9.) O-RING-AIR BLEED PLUG: Seals
the air bleed plug in the head.
4 Part Names and Functions
(continued)
The following descriptions apply to figure 4-1. The number preceding the part
name corresponds to the number in the figure.
10.) PLUG-AIR BLEED (BLEEDER
ASSY.) : Seals the air bleed
opening in the head when closed.
Allows excess air to be removed
from the cylinder when priming.
11.) HANDLE-TAPERED BLACK
(Plastic): Black plastic handle that
fits onto the stainless steel handle.
12.) SPIGOT-LONG CENTER
WITHOUT HANDLE (Stainless
Steel): Seals the product opening
in the dispense head when closed.
Allows product to flow when open.
13.) ROD-HANDLE CENTER SPIGOT
(Stainless Steel):
Opens
and closes the spigot to start and
stop the flow of product from the
freezer.