Before Installation
As you plan for the installation of your system, con-
sider these important subjects as listed below:
• When to use lockout / tagout devices
• Lifting the equipment safely - See
Section 2 -
Health and Safety, Page 11
.
• Utilities
• Placement
The typical kind of LOTO device for an i220 press
is a clam shell type device (with lockout capability).
The LOTO device is placed over the plug end of the
electrical cord. This effectively prevents access to the
energy isolation point. See the example of one such
device in the figure above.
The figure to the right shows the lockout device in
the closed, locked position.
Figure 3-1
Lockout Device In Open Position,
Unlocked
Figure 3-2
Bottom Lockout Device In
Closed Position, Locked
Continued
Electrical safety hazards
exist inside the i220 press-
chassis . Before making any
internal adjustments to the
i220 press, apply a lockout/tagout
(LOTO) device to the i220 press
chassis .
WARNING
When to Use Lockout / Tagout Devices
Page 15
Dukane Manual Part No. 403-594-02
Section 3 - Installation
