DO NOT make any modi-
fications to the press or
associated cables as the
changes may result in
violating one or more reg-
ulations under which this equipment
is manufactured.
Regulatory Agency Compliance
FCC
The
iQ
i220 Integrated Press complies with the following
Federal Communications Commission regulations.
• The limits for FCC measurement procedure MP-5,
“Methods of Measurement of Radio Noise Emissions
from ISM Equipment”, pursuant to FCC Title 47 Part
18 for Ultrasonic Equipment.
CE Marking
This mark on your equipment certifies that it meets the
requirements of the EU (European Union) concerning
interference causing equipment regulations. CE stands
for Conformité Europeéne (European Conformity). The
equipment complies with the following CE requirements.
• The EMC Directive 2014/30/EU
for Heavy Industrial —
EN 61000-6-4: 2001
EN 55011: 2003
EN 61000-6-2: 2005
EN61000–4–2
EN61000–4–3
EN61000–4–4
EN61000–4–5
EN61000–4–6
EN61000–4–8
EN61000–4–11
• The Low Voltage Directive 2014/35/EU.
• The Machinery Directive 2006/42/EC.
EN 60204: Safety of Machinery - Electrical Equipment
of Machines Part 1: General Requirements.
• EN ISO 12100 Safety of machinery - General principles
of design, risk assessment, and risk reduction.
IP (International Protection)
Rating
The iQ i220 Integrated Press has an IP rating from the IEC
(International Electrotechnical Commission).
The rating is IP2X, in compliance with finger-safe industry
standards.
CAUTION
UL
The
iQ
i220 Integrated Press complies with these
standards:
Underwriters Laboratories
:
UL 61010-1:2012, and
National Standards of Canada
:
CAN/CSA C22.2 No. 61010-1-12:2012
as verified by TÜV Rheinland.
Page 112
iQ Series
Ultrasonic Integrated Press System i 220 User’s Manual
Dukane Manual Part No. 403-594-02
