26
BLUEHEAT™ SYSTEM__________
UNCONTROLLED IF PRINTED
QSP-711-101
POST DIVE CARE
BlueHeat™ Liner
The BlueHeat™ Liner requires additional attention above and beyond typical
undergarment care. Prior to disconnecting the battery pack wires from the
suit port, ensure the batteries have been turned off. Failing to turn the
batteries off may result in the battery shorting out causing damage or failure
to the System.
1. Carefully disconnect the SBS™ cable to the suit port by pulling the wet
connector from the suit port connector.
2. Unzip the suit and disconnect the liner and wiring harness connections on
the inside of the suit port. Remove the top of the drysuit.
3. Pull both arms out of the drysuit one at a time being careful not to unplug
the electric glove liners, if used.
4. Unplug the electrical wire connections to the gloves and remove the
gloves.
5. Remove the rest of the drysuit being careful not to unplug the socks from
the leg and sock connectors.
6. Once the drysuit has been removed. Disconnect the sock wire
connections from the liner and remove the socks.
7. Remove the liner carefully to ensure the wires on the arms and leg are
not pulled.
Wash Instructions
Hand wash. Line dry only. Do not use bleach. Avoid use of fabric softners.
