DIVING THE BLUEHEAT™ SYSTEM
Important Safety Information
DUI’s heated liner, accessory gloves and socks are designed for less than 7
volts. Do not use the heated liner, accessory gloves and socks with any other
electrical battery system other than DUI’s BlueHeat™ SBS™.
!! WARNING !!
Turning on the System for an extended period of time
prior to entering the water may cause rapid
overheating and hyperthermia.
Donning the BlueHeat™ Liner & Accessories
1. Once the SBS™ has been secured on the tank(s)/CCR, put the
BlueHeat™ Liner on taking care that all wires and connectors are loose
and do not catch on any part of the body.This is to ensure a full range of
movement can still be achieved without damaging wiring within the liner.
2. Make sure the accessory harness is installed if you plan on using heated
gloves and/or socks.
3. Pull both socks on over the liner and connect them to the wiring harness.
See FIG. 16
4. Put on additional divewear insulation and socks.
5. Put on your drysuit being careful not to unplug the connectors on your
socks. Once the lower portion of the dry suit is on, pull the upper half of
the suit up and over the head making sure that the wires from the valve
port and those coming out the chest of the divewear are accessible. (For
shoulder entry suits, connect the wiring BEFORE putting on the top half of
your suit.)
23
BLUEHEAT™ SYSTEM__________
UNCONTROLLED IF PRINTED
QSP-711-101
FIG. 16
