190
191
ENGLISH
L1315004 Installation guide for DucoBox Energy Premium (Revision J | 22.10.2021)
07
Commissioning
DucoBox Energy Premium start-up
The unit must not be powered up until everything has been connected correctly.
This includes the air ducting
systems as well as all electrical components� Failure to connect correctly can result in the permanent destruction
of the DucoBox Energy Premium or to serious physical injury!
Switch on the power to the DucoBox Energy Premium (plug into power socket)� When the DucoBox Energy Premium starts up
for the first time, you will be asked to enter a few basic settings� Navigate using the arrow keys ( and ) and confirm using
enter
( )�
Next steps
After these steps, you can proceed with the following steps in order to complete the installation:
• Pairing control components with the DucoBox Energy Premium (Electrical system, see page 192)�
• DucoBox Energy Premium air-side calibration (see page 194)�
•
A timer program will need to be set
if there are no CO
2
and/or humidity sensors fitted in the system (see page 197)�
•
Optional:
changing settings� The factory settings will suffice in most cases� However, it is possible to configure settings such as
the Bypass and comfort temperature to suit the occupants’ wishes (see page 198)�
The DucoBox Energy Premium will be ready for use after that�
In order to avoid contamination in ductwork it is advisable not to put the unit into operation until the house is occupied� This is to
prevent dust from the building phase getting into the ductwork and the unit�
What happens in a power cut?
If the power supply to the DucoBox Energy Premium fails, it will retain all its settings� Once power has been restored, the DucoBox
Energy Premium will start up again and run� The correct time will need to be set again if the DucoBox Energy Premium is without
power for more than (around) 8 hours�
3_IM Energy Premium.indb 191
3_IM Energy Premium.indb 191
22/10/2021 11:52:04
22/10/2021 11:52:04
