Ducati Monster 696 2009, Manual, Page: 535 / 696

A
B
C
D
E
F
G
H
L
M
N
P
section
N 8
153 Monster 696/696+ - M.Y. 2009 - edition 00
Engine
Refitting the flywheel-alternator assembly
Fit the washer (17) (suitably lubricated), needle roller bearing (19), and inner race (18) to the crankshaft. Make sure the inner race
is centred relative to the washer.
Install the flywheel-rotor-driven gear assembly on the crankshaft, taking care not to alter the position of the inner race (18)
relative to the washer (17).
The flywheel reference mark must be aligned with the groove on the crankshaft, in correspondence with the keyway.
Lubricate the contact surfaces of Belleville washer (33) with engine oil.
Fit the Belleville washer (33) on the end of the crankshaft.
18 19 17
A
33