Ducati Monster 696 2009, Manual

Page: 194 / 696

A
B
C
D
E
F
G
H
L
M
N
P
section
G 1
10 Monster 696/696+ - M.Y. 2009 - edition 00
Wheels - Suspension - Brakes
Grease the threads and undersides of the heads of screws (A).
Screw in the two screws (A) securing the brake caliper (B).
Pre-tighten the screws (A) to the specified torque (Sect. C 3, Frame torque settings).
Operate the front brake lever two or three times.
Hold the lever pulled in towards the grip and tighten the screws (A) to the specified torque (Sect. C 3, Frame torque settings).
Check that the brake discs turn freely inside the calipers.
Before tightening the axle clamp screws (2), lower the bike to the ground and push up and down on the handlebars to load the
suspension so the fork legs will become properly seated onto the wheel axle.
Lubricate the screws (2).
Tighten the screws (2) to the specified torque (Sect. C 3, Frame torque settings), in the sequence 1-2-1.
B
A
B
B
A
B
2