Ducati Monster 696 2009, Manual

Page: 223 / 696

A
B
C
D
E
F
G
H
L
M
N
P
section
G 4
39 Monster 696/696+ - M.Y. 2009 - edition 00
Wheels - Suspension - Brakes
Hook the chain onto the rear sprocket and introduce the wheel into the swingarm.
During this operation, make sure that the spacer (10) remains in its seating.
Insert the axle from the left-hand side of the swingarm, through the LH chain tensioner slider, the wheel hub, the hole on the
caliper mounting bracket and the hole in the RH chain tensioner slider.
Push the axle (2) until fulyl seated, from the left-hand side of the swingarm.
Apply grease to thread of the rear wheel axle (2) and to the contact face of the nut (1).
Screw he nut onto the rear wheel axle (2) on the right-hand side of the swingarm.
Hand tighten the nut.
Proceed with the operations of chain tensioning and wheel alignment (Sect. D 4, Adjusting the chain tension).
Check that the brake hose is not pinched or excessively bent.
Tighten the nut (1) on the axle (2) to the specified torque (Sect. C 3, Frame torque settings).
Tighten the screws (4) to the specified torque (Sect. C 3, Frame torque settings).
10
2
4
1
B
B
4
1