Ducati Monster 696 2009, Manual

Page: 136 / 696

A
B
C
D
E
F
G
H
L
M
N
P
section
E 1
6 Monster 696/696+ - M.Y. 2009 - edition 00
Fairings
Reassembly of the headlight fairing
Important
On refitting the headlight fairing, always refit the washers (14) in correspondence with the retaining screws (13) to avoid
damaging the painted parts and the Plexiglas windshield (10).
Refitting is the reverse of removal; tighten the retaining screws (13) to the specified torque (Sect. C 3, Frame torque settings).
Refitting the headlight fairing (696+)
Fit the brackets (5) to the headlight support, fitting the screws (9) and nuts (6).
Counterhold the nuts (6) and tighten the screws (9) to the specified torque (Sect. C 3, Frame torque settings).
Refit the brackets (5), insert the screws (7) and tighten them to the specified torque (Sect. C 3, Frame torque settings).
Check that the quick-release fasteners (12) are inserted in the brackets on the headlight fairing.
Fit the headlight fairing, locating it on the headlight support and fit the screws (9) and nuts (6).
Tighten the screws (11) to the specified torque (Sect. C 3, Frame torque settings).
10
13
8
11
14
9
5
6
7 5
5
10 14
13
12
8
11