![background image](http://html1.mh-extra.com/html/ducati/diavel-1260/diavel-1260_owners-manual_2537645323.webp)
Reposition conveyor (B) and right cowling (A), then
fasten them as follows:
●
start the side screw (1) securing it to the
electrical components compartment;
●
start the screws (2) for lower securing to the
central cowling;
●
start screw (3) securing central cowling to right
cowling;
●
start the front retaining screw (4).
Tighten screws (1), (2) and (3) to a torque of 4 Nm
±10%.
Tighten screw (4) to a torque of 4 Nm ±10%.
Fit quick-release fastener (C).
Attention
The battery gives off explosive gases; never
cause sparks or allow naked flames and cigarettes
near the battery. When charging the battery, ensure
that the working area is properly ventilated.
Charge the battery in a ventilated room.
Connect the battery charger leads to the battery
terminals: the red one to the positive terminal (+),
the black one to the negative terminal (-).
Ducati disclaims any liability deriving from the use of
non-original Ducati chargers or maintainers. It is
A
A
B
1
2
3
Fig 236
A
B
C
1
4
3
2
Fig 237
322
Summary of Contents for Diavel 1260
