Key-On/Key-Off using the pin code
(immobilizer override)
Key-On can be performed by pressing button (1) on
the hands free unit without the presence of the
active (3) and passive (4) keys and entering the pin
code on the instrument panel.
Key-Off can be performed by pressing button (6) on
the handlebar.
After each Key-Off, if the key is not present upon
next Key-On, the pin code must be entered.
The pin code is set by the customer upon delivery of
the motorcycle.
The function is not enabled unless a pin code has
been set.
When the Hands Free button (1) is pressed, the
instrument panel activates the backlighting and the
round display to allow the rider to enter the four-
digit pin code.
Entering the correct pin turns on the instrument
panel and enables engine starting.
Pin code must be entered within 120 seconds, after
which a Key-Off occurs automatically.
1
Fig 49
4
3
Fig 50
73
Summary of Contents for Diavel 1260
