Ducati Diavel 1260 Owner'S Manual Download Page 353

Page: 353 / 386

TOP-UPS

TYPE

Cooling circuit

ENI Agip Permanent Spezial antifreeze

(do not dilute, use pure)

2.5 litres

(0.55 UK gal)

Important

Do not use any additives in fuel or lubricants. Using them could result in severe damage of the engine

and motorcycle components.

Attention

The motorcycle is only compatible with fuel having a maximum content of ethanol of 10% (E10).

Using fuel with ethanol content over 10% is forbidden. Using it could result in severe damage of the engine

and motorcycle components. Using fuel with ethanol content over 10% will make the warranty null and void.

Important

These references indicate the fuel recommended for this vehicle as specified by the European

regulation EN228.

352

Summary of Contents for Diavel 1260



































































































































































































































































































































































































Search results

Summary of Contents for Diavel 1260

Reviews:

Related manuals for Diavel 1260

Brands by name

Popular brands

Ducati Diavel 1260, Owner'S Manual

Search results

Summary of Contents for Diavel 1260

Reviews:

Related manuals for Diavel 1260

Brands by name

Popular brands