Ducati Diavel 1260, Owner'S Manual

Page: 151 / 386

Selecting the Riding Mode
Press CONFIRM MENU button (4) to view the menu
for selecting the Riding Mode (A). The instrument
panel displays the speed indication (on the RH side)
and displays riding mode name (on the LH side):
●
SPORT
●
TOURING
●
URBAN
One of them will be marked to indicate the last
memorised condition that is currently active.
For the marked Riding Mode, instrument panel
always displays information concerning some of the
associated parameters:
●
engine power (ENGINE): ENGINE lettering
followed by set engine power (HIGH, MED,
LOW);
●
DTC system: DTC lettering followed by the set
level (1, 2, 3, 4, 5, 6, 7, 8) in case DTC is active or
followed by OFF in case DTC is disabled;
●
ABS system: the ABS text followed by the level
of calibration set (1, 2, 3);
●
DWC: the DWC text followed by the level of
intervention set (1, 2, 3, 4, 5, 6, 7, 8) in case the
DWC is active or by OFF in case the DWC is
disabled;
●
DQS: the DQS text followed by set status (U/D,
OFF) in case the DQS is active or by OFF in case
the DQS is disabled;
Any time the CONFIRM MENU button (4) is pressed,
you highlight a riding mode and the associated
parameters are displayed (A, Fig 109).
Once the desired riding mode (A, Fig 109) is
highlighted, confirm the selection by holding down
the CONFIRM MENU button (4) for 2 seconds: the
new riding mode selection is stored and the standard
screen (C, Fig 109) is displayed for the selected riding
mode.
Once the desired riding mode is highlighted, if the
CONFIRM MENU button (4) is not pressed within 5
seconds, the new riding mode selection is not stored
and the Standard screen is displayed.
150