It is possible to increase or decrease set cruise speed,
by pressing buttons (6) and (7), respectively.
Every "click" corresponds to a speed increase or
decrease of 1 Km/h (0.62 mph).
By keeping the RES button (6) pressed, the target
speed increases progressively.
By keeping the SET button (7) pressed, the target
speed decreases progressively.
Each time the target speed is modified, this is shown
for 5 seconds instead of the SET icon.
Important
In case of a long DTC (Traction Control) event,
the Cruise Control will automatically turn off.
It is possible to enable the Ducati Cruise Control only
if all the below conditions are met:
●
second gear or higher engaged;
●
vehicle speed higher than or equal to 50 Km/h
(30 mph) or lower than or equal to 200 Km/h (125
mph).
The Ducati Cruise Control can be disabled as follows:
1) by pressing button (5);
2) by pulling the front brake lever;
3) by pressing the rear brake pedal;
4) by pulling the clutch lever.
Conditions 2-3-4 bring the system in stand-by
mode: the Cruise Control light remains on.
Condition 1 brings the system in OFF condition: the
Cruise Control is switched off.
The Ducati Cruise Control system controls the
vehicle speed only between 50 Km/h (30 mph) and
200 Km/h (125 mph).
286
Summary of Contents for Diavel 1260
