Dualit 85172, Instruction Manual & Guarantee

Page: 8 / 21

14 15
11 12
Once the Water Tank has
been filled, use the carry
handle to place it back into
the machine. Ensure that
the water outlet is aligned
with the water inlet of the
machine.
Using the cut-out of the
Water Tank handle, lift out
the Coffee Bean Hopper
Cover.
13
Fill the machine with coffee
beans to no higher than the
Grind Size Selector Knob.
Note: Use whole beans only.
Never put ground coffee in
the Hopper.
14 15
Align the Coffee Bean
Hopper Cover with the
Hopper and push in. The
top of the lid must be flush
with the machine, this will
ensure the Coffee Hopper
Lid Seal is engaged.
Pull the Steam Wand Metal
Cover downwards to
remove. Rinse with warm
water and place onto a
clean surface.
SETTING UP
- CONTINUED
*If you have trouble removing the Nozzle, call Customer Services on 01293 652500.
Twist the Steam Wand a
1/8 turn towards the Coffee
Nozzle (clockwise when
viewed from above) and
pull downwards to remove.
Rinse with warm water and
wipe clean. Do not apply
excessive force.*
FILL MACHINE
WITH COFFEE
REMOVE STEAM
WAND METAL
COVER AND RINSE
REMOVE COFFEE
HOPPER COVER
COFFEE HOPPER
COVER INSTALL
WATER TANK
INSTALL
Push Steam Wand up into
Steam Nozzle and align the
slot in the Steam Wand with
the pip on the Steam Nozzle.
Twist 1/8 turn towards the
Coffee Nozzle (anti-clockwise
when viewed from above) to
secure.
Place 150ml container
underneath Coffee Nozzle.
Plug in Power Cord and
press the Power Button
to turn the machine on.
Water will purge through the
Coffee Nozzle.
Place a 150ml container
below the Coffee Nozzle
and go to Manual Rinse on
page 21.
WARNING: Water may
be hot.
Place a 150ml container
below the Steam Nozzle,
press Hot Water Button
and dispense hot water for
10 seconds.
WARNING: Water may
be hot.
SETTING UP
- CONTINUED
Your machine is now ready
to use.
22
READY
U
N
PL
U
G W
HEN NO
T
IN
U
SE
SW
ITCH OFF &
16
REMOVE AND
CLEAN STEAM
WAND
20
MANUAL RINSE
17
STEAM WAND
INSTALL
19
TURN MACHINE
ON
21
HOT WATER RINSE
Push the Steam Wand Metal
Cover upwards onto the
Steam Wand until the top
of the Steam Wand Metal
Cover is touching the top of
the Steam Wand.
18
STEAM WAND
METAL COVER
INSTALL