Dualit 85172, Instruction Manual & Guarantee

Page: 13 / 21

24 25
Empty the contents of the
External Drip Tray into a
sink.
Remove Internal Drip Tray
by pulling on the handle.
3
Remove the Grounds
Container from the Internal
Drip Tray and empty the
contents into a bin. Rinse
the Grounds Container with
warm water and dry off. Place
Grounds Container to one side.
4
Drain the contents of the
Internal Drip Tray into a
sink, then wash and dry.
CLEANING
It is recommended to clean your machine after each day of use in order
to extend its life.
Before cleaning, make sure your machine is
switched off, unplugged and allowed to cool.
EMPTY GROUNDS
CONTAINER
DRAIN INTERNAL
DRIP TRAY
CLEANING -
CONTINUED
7
Rinse Infuser under tap
with warm water. Ensure to
dry afterwards. DO NOT
PUT IN DISHWASHER
OR SUBMERGE UNDER
WATER.
RINSE INFUSER
9
Push the Infuser into the
Infuser Support. Please
ensure that both of the
orange clips engage. There
will be an audible click once
engaged.
INSTALL INFUSER
6
Remove the Infuser by
pressing both the orange
buttons inwards.
REMOVE INFUSER
U
N
PL
U
G W
HEN NO
T
IN
U
SE
SW
ITCH OFF &
U
N
PL
U
G W
HEN NO
T
IN
U
SE
SW
ITCH OFF &
1 REMOVE AND
DRAIN EXTERNAL
DRIP TRAY 2 REMOVE INTERNAL
DRIP TRAY
Place the Grounds Container
onto the Internal Drip Tray
and slide into the machine.
The front of the Drip Tray will
be flush with the machine, if it
is not, there is likely to be an
obstruction.
11 INTERNAL DRIP
TRAY INSTALL
Press on the bottom of the
Service Door to raise its
top edge. Pull on the top
edge to remove the service
door. Wipe inside of Service
Door.
5
REMOVE SERVICE
DOOR
Align the Service Door’s two
metal pins into the slots of the
appliance body. Once aligned,
push the Service Door into
place.
10 REPLACE SERVICE
DOOR
Pull the Steam Wand Metal
Cover downwards to
remove. Rinse with warm
water and place onto a
clean surface.
12 REMOVE STEAM
TUBE METAL
COVER AND RINSE
Use the supplied Cleaning
Brush to clean the Powder
Outlet above the Infuser
Support.
8 CLEAN INSIDE OF
MACHINE