USER MANUAL
48
Alarm In
:
I/O channel.
Alarm Type
:
There are 3 types for your choice: Normally-Open, Normally-Close, and OFF.
Choose the one to match your sensor type, or choose OFF to close the sensor trigger function.
Buzzer
:
The NVR can use its internal buzzer to emit an alarm tone. You can set the buzzer
duration in seconds when a sensor is triggered.
Alarm out
:
Tick to enable external alarm device to emit an alarm tone when a sensor is triggered.
Latch Time
:
you can set how long the buzzer will sound when external sensor is triggered (10s,
20s, 40s, and 60s).
Record
: Click
icon and choose which channel(s) you want to record when the motion
detection is triggered.
Post Recording
:
You can set how long alarm record will last when alarm ends (30s, 1minutes,
2minutes, 5minutes).
Show Message
:
Display the alarm messages on the screen when sensor is triggered.
Send Email
:
Set to send email to specified email when sensor is triggered.
Full Screen
:
When sensor is triggered, the corresponding channel will be switched to the full
screen mode.
FTP Picture Upload
: To upload alarm images to FTP server when IO is alarm. To enable FTP,
FTP Video Upload
: To upload alarm video to FTP server when IO is alarm. To enable FTP,
Picture to Cloud
: To upload alarm images to Cloud server when IO is alarm. To enable Cloud,
5.5.2 Cloud.
Video to Cloud
: To upload alarm video to Cloud server when IO is alarm. To enable Cloud,
5.5.2 Cloud.
Summary of Contents for NVR-9832P32
Page 1: ......
