USER MANUAL
35
Buzzer
: Disable or to active the buzzer to emit an alarm tone in 10, 20, 40 or 60 seconds when
the detection is triggered
Post Recording
: You can set how long after an event occurs that the NVR will continue to
record.
Latch Time
: To configure the external alarm time when the detection is triggered.
Alarm Out
: If your NVR support to connect to external alarm device, you can set to emit an alarm
tone.
Show Message
:
A letter “S” will be displayed on the screen when the LCD function is triggered.
Send Email
:
If an alarm is triggered, an Email will be sent to your preset email account.
Full Screen
:
When the detection is triggered, the channel will be enlarged into full screen.
Record Channel
:
to select the channel(s) you want to record when a detection is triggered.
Notice:
1) The lines shall not be too close to the edges of the camera picture, to avoid any failure to
trigger an alarm when the target cross through it.
Summary of Contents for NVR-9832P32
Page 1: ......
