USER MANUAL
37
Channel
:
to select the channel you want to configure
Switch
:
to enable or disable the SOD function
Area
:
Click [
Setup
] to draw a virtual region in the camera picture.
1.
Choose one of the Rule Number. It is the number of SOD area. Maximum 4 areas you can set
for SOD function.
2.
To enable the detection in
Rule Switch
.
3.
Choose a
Rule Type
.
Legacy: NVR will only detect the left-over objects;
Lost: NVR will only detect the lost objects;
Legacy & Lost: NVR will detect both left-over & lost objects.
4.
Use your mouse to click 4 points in the camera picture to draw a virtual region. The sharp of
the region should be a convex polygon. Concave polygon will be not able to save.
5.
Click
Save
to save your settings.
6.
If you want to adjust the size of the region, click the red box in the region, the borders of the
region will be changed to red color. Long press the left button of your mouse to move the whole
region, or drag the corners to resize the region.
7.
If you want to remove one of the regions from the camera picture, click the red box in the region
and then click
Remove
button. Click
Remove All
will delete all regions.
Summary of Contents for NVR-9832P32
Page 1: ......
