USER MANUAL
59
Apply Mode
: Set the detection angle. There are frontal face mode, multi-angle mode and custom angle
mode.
Roll Range
: Under the custom angle, set the range of face rotation.
Pitch Range
:
Under the custom angle, set the range of face up and down.
Yaw Range
: Under the custom angle, set the horizontal flip range of the face.
Frontal view/Muti Angle Default
:
Set the angle to default mode, which means frontal face mode and multi-
angle mode.
Picture Quality
:
Set the image quality, 1 represents the lowest quality, and 100 represents the highest
quality.
Min Pixel
: Set the minimum recognition pixel box. The face can only be recognized when the pixel of face
is larger than the setting pixels.
Face Enhance
: Face enhancement makes it easier to recognize faces after it is enabled.
Detection Mode
: There are two detection modes: static and dynamic.
Rule Kind
: Types of rules. There are rectangular and linear rules.
Detection Range
: Under the rectangle rule, set the detection area. The detection area can be customized.
The default detection area is full-screen area.
Rule Type
: Under the linear rule, set the line-crossing rule. A line is needed to be drawn in the preview box
on the right. When the face crosses the line according to the setting rules, it will be detected.
5.4.1.2 Human & Vehicle Detection
In this menu, you can set the parameters of human & vehicle detection
Click
to enter the setting interface.
Switch
: Enable or disable human & vehicle detection.
Summary of Contents for NVR-9832P32
Page 1: ......