DSS NVR-9832P32 User Manual Download Page 35

Page: 35 / 149

USER MANUAL

5.1.8 Deterrence

This menu allows you to configure Deterrence parameters.

Channel: channel name.

Setup

Click

icon into the setup page.

Light Switch

: Enable or disable light warning.

Siren Switch

: Enable or disable siren warning.

Sensitivity

: Set the sensitivity level. Level 1 the lowest sensitivity level while level 8 is the highest

sensitivity level.

Schedule

: click

icon

to open the setup page.

Deterrence Area:

The whole screen is marked for

deterrence detection (red blocks) as

default. If you want to disable the

deterrence detection on a certain area,

click the grid cursor and then drag the

mouse to highlight the scope to unmark

the area into transparent blocks. After

setting is completed, click the right button

of your mouse to return and click

Save

make the area setup effective.

Summary of Contents for NVR-9832P32






















































































































































Search results

Summary of Contents for NVR-9832P32

Reviews:

Related manuals for NVR-9832P32

Brands by name

Popular brands

DSS NVR-9832P32, User Manual

Search results

Summary of Contents for NVR-9832P32

Reviews:

Related manuals for NVR-9832P32

Brands by name

Popular brands