DSS NVR-9832P32 User Manual Download Page 88

Page: 88 / 149

USER MANUAL

Interval

: Configure the length of the time interval between the notification emails from the NVR.

To make sure all settings are correct, click

Test Email

. The system sends an automated email

message to your inbox. If you received the test email, it means the configuration parameters are

correct.

5.5.3.2 Email Schedule

You need to configure the schedule to fully implement the Email notification.

The color codes on email schedule have the following meanings:

Green

: Slot for Motion detection.

Yellow

: Slot for I/O Alarm (optional).

Red

: Slot for Exception (HDD full, HDD error, or Video Loss).

Blue

: Slot for Intelligent Analysis detection.

5.5.4 FTP

This menu allows you to enable FTP function to view and load captured snapshots from NVR to

your storage device over FTP.

Summary of Contents for NVR-9832P32






















































































































































Search results

Summary of Contents for NVR-9832P32

Reviews:

Related manuals for NVR-9832P32

Brands by name

Popular brands

DSS NVR-9832P32, User Manual

Search results

Summary of Contents for NVR-9832P32

Reviews:

Related manuals for NVR-9832P32

Brands by name

Popular brands