14
the
button to save.
7.
Keep pressing the downward
button until the LCD displays “EXIT SETUP”. Press the
button to exit.
NOTE
: The IP Phone will automatically search and download the latest version of software from the Blaze
Server and then reboot with the latest version.
In DHCP Environment
If your LAN is under DHCP environment, you can skip the settings of IP address, Gateway IP and Subnet
Mask. Instead, you can move to “DHCP” setup item and enable this function.
1.
Plug in the power cord of the IP phone and please DO NOT connect the IP phone to LAN.
2.
After the system check, press and hold the middle
button for 3 seconds to enter the setup menu.
Input your password, if any. The default password is 1234.
3.
You will see “EXT NUMBER” shown on the LCD screen. Press the
button to start editing and
use the keypad to input the extension number assigned to the IP phone. Press the
button again
to save.
4.
Keep pressing the downward
button until the LCD displays “DHCP.” Press the
button to
start editing and then press the downward
button to change the selection to “On” Press the
button again to save.
5.
Keep pressing the downward
button until the LCD displays “PBX SERVER IP.” Press the
button to start editing and use the keypad to input the IP address of your Blaze Server. Press the
button to save.
6.
Keep pressing the downward
button until the LCD displays “EXIT SETUP”. Press the
button to exit.
Summary of Contents for Blaze 1200 Series
Page 20: ...20 10IPBXQ BZ2 32b EN3...
