18
2.
Enter the IP address of the Blaze Server in the field “IP Address” for built-in recording system. For
Professional Recording System, please enter its associated IP address.
3.
The default value of “Port Num” is “10”, which means the system can record up to 10 extensions at
the same time.
4.
Define the ”Storage Limitation” of the hard disk and the “Auto Purge Days”. When exceeding the
hard disk limit, the system will delete the recordings of days as set on “Auto Purge Days”. For
example, if the Storage Limitation is “80%” and the Auto Purge Days is “7”, the system will
automatically delete previous 7-days recording data when it reaches the storage limitation.
5.
Put a check on the item of “Recording Beep” according to your company’s requirement or the
Government’s regulation. When the Recording Beep is activated, the caller and the receiver will hear
the beep sound every 15 seconds during a call.
6.
Recording Flash: You can enable the Recording Flash function. After the Recording Flash is enabled,
the recording lamp on the recorded extension will keep flashing until the call is hung up. If you need
to record to an extension confidentially, please do not enable this function.
Store on Demand List
You can add up to 10 extensions in the Store on Demand list. The system will continuously record to these
extensions during a call.
1.
Go to Main Menu>Gateway Configuration> Recording System.
2.
From the ”Extension” list, move the extension number to the “Store on Demand” list. The system
can
record to up to 10 extensions at once.
Activate the Recording
1.
During a call, press the specific programmable button or Rec/Play button to active the function.
2.
After the call is hung up, the system will stop recording.
Summary of Contents for Blaze 1200 Series
Page 20: ...20 10IPBXQ BZ2 32b EN3...
