13
key.
Settings on IP Phones
1.
Plug in the power cord of the IP phone and please DO NOT connect the IP phone to LAN.
2.
After the system check, press and hold the middle
button for 3 seconds to enter the setup menu.
Input your password, if any. The default password is 1234.
3.
You will see “EXT NUMBER” shown on the LCD screen. Press the
button to start editing and
use the keypad to input the extension number assigned to the IP phone. Press the
button again
to save.
4.
Press the downward
button and the LCD screen will display “IP ADDRESS.” Press the
button to start editing and use the keypad to input the IP address assigned to the IP phone. Press the
button to save.
5.
Follow the above procedures to assign the “GATEWAY IP” and “SUBNET MASK” to the IP phone
6.
Keep pressing the downward
button until the LCD displays “PBX SERVER IP.” Press the
button to start editing and use the keypad to input the IP address of your Blaze/Savanna Server. Press
Summary of Contents for Blaze 1200 Series
Page 20: ...20 10IPBXQ BZ2 32b EN3...
