DSC Power608, Installation Manual

Page: 33 / 52

P r o g r a m m i n g W o r k s h e e t s
29
[005] System Times
Default Valid entries: [001-255]
030
I_______I_______I_______I
Entry Delay 1 (in seconds) and 5.18 “Entry/Exit Delay Options” on page 24)
045
I_______I_______I_______I
Entry Delay 2 (in seconds) and 5.18 “Entry/Exit Delay Options” on page 24)
120
I_______I_______I_______I
Exit Delay (in seconds) and 5.18 “Entry/Exit Delay Options” on page 24)
004
I_______I_______I_______I
Bell Cut-off (in minutes) and 5.13 “Bell” on page 22)
[006] Installer’s Code
(Section 4.1 “Installer’s Programming” on page 12)
Default
5008
I_______I_______I_______I_______I
[007] Master Code
(Section 5.1 “Programming Security Codes” on page 14)
Default
1234
I_______I_______I_______I_______I
[008] Maintenance Code
(Section 5.1 “Programming Security Codes” on page 14)
Default
AAAA
I_______I_______I_______I_______I
[009] PGM Output Programming (PGM 1 and 2)
(Section 5.11 “PGM Output Options” on page 20)
Programmable Output Options
01 Burglary and Fire Bell Output 14 Ground Start Pulse
02 For future use 15 Remote Operation (DLS-1 Support)
03 Sensor Reset 16 For future use
04 For future use 17 Away Armed Status
05 System Armed Status 18 Stay Armed Status
06 Ready To Arm 19 Command Output #1 ([*][7][1])
07 Keypad Buzzer Follow Mode 20 Command Output #2 ([*][7][2])
08 Courtesy Pulse 21 Command Output #3 ([*][7][3])
09 System Trouble Output (with Trouble options) 22 Command Output #4 ([*][7][4])
10 System Event [Strobe (with Event options)] 23 Silent 24 Hour (PGM2 Only)
11 System Tamper (all sources: zones, kpd, modules) 24 Audible 24 Hour (PGM2 Only)
12 TLM and Alarm 25 For future use
13 Kissoff Output 26 Battery Test
NOTE:Output types [03] and [20] cannot be used together on the same system.
Default Default
10
I_______I_______I
PGM 1 19
I_______I_______I
PGM 2
Program PGM Option Attributes in sections [141] & [142].
[010] PC5208 PGM Output Programming (PGM 3-10)
(Section 5.11 “PGM Output Options” on page 20)
Default Default
01
I_______I_______I
PGM 3 01
I_______I_______I
PGM 7
01
I_______I_______I
PGM 4 01
I_______I_______I
PGM 8
01
I_______I_______I
PGM 5 01
I_______I_______I
PGM 9
01
I_______I_______I
PGM 6 01
I_______I_______I
PGM 10
Program PGM Option Attributes in sections [143] - [150].
[011] PC5204 PGM Output Programming (PGM 11-14)
(Section 5.11 “PGM Output Options” on page 20)
Default Default
01
I_______I_______I
PGM 11 01
I_______I_______I
PGM 13
01
I_______I_______I
PGM 12 01
I_______I_______I
PGM 14
Program PGM Option Attributes in sections [151] - [154].