29
Ethernet/Cellular Programming Options
3G Alarm Communicator Installation Manual
2. Not Used
3. Radio reset
4. Radio attached to network
5. Receiver 1 Initialized
6. Receiver 2 Initialized
7. Receiver 3 Initialized
8. Receiver 4 Initialized
For example, the radio initialization status code 12-45--- indicates that Radio has been powered
up, the radio is attached to the network, and Receiver 1 has been initialized. This code could be
followed with...567 if Receivers 2, 3, and 4 are initialized where applicable.
If the radio initialization status code does not indicate any problems, proceed with installation as
per this manual. If troubles are reported, reset the initialization process. If this action does not fix
the problem, refer to Trouble shooting section in this manual.
The following table shows each digit position in the status code, each digit’s value and its assigned
meaning in the eight-digit code:
Table 18: Radio Initialization Status - 1-8 bits completion
Bit
1
2
3
4
5
6
7
8
Not Completed
-
-
-
-
-
-
-
-
Completed
1
2
3
4
5
6
7
8
