42
1. Assembly of the Back End Cap
Position the LEG MAGIC™ on the ends
of the tracks such that both tracks are slightly
opened as shown. Push the rear
end cap onto the back pipe such that
the screw hole on the side of the
rear end cap and the side of the back
pipe are aligned above one another.
Insert a recessed head screw and
tighten it.
Primary frame-assembly
Back pipe
Rear end
cap
Holes
M5 x 13 mm
recessed
head
screw
Groove
2a
Front
end cap
Hole
M5 x 13 mm
recessed
head screw
Rear end cap
2b
Front
end cap
a.
Position the trainer on the fl oor
such that the rear end cap, which
you just assembled, is situated on
the fl oor as shown. Push a front
end cap into the support pole and
align the groove and the threaded
bore with one another. Insert the
recessed head screw and tighten it.
b.
Repeat this process on the other
side.
2. Assembly of the Front End Cap
03355_DE-GB-FR-NL_V6.indb 42
06.07.11 09:12