manualshive.com logo in svg

Drucker Diagnostics QBC STAR, System Operator'S Manual

Share
Download
Drucker Diagnostics QBC STAR System Operator'S Manual Download Page 52

QBC STAR System Operator’s Manual

6000-300-000

 7–2

E1 - Main Board

Error Number

Description

Corrective Action

100

Main board error

1.  Record the error message displayed on the LCD screen
2.  Export the support file (Ref. page 2-8)
3.  Power down the instrument (Ref. page 4-10)
4.  Turn the instrument Power on (Ref. page 4-2)
5.  If the error persists contact Technical Support

101

Main board/IO board 
communication error

1.  Record the error message displayed on the LCD screen
2.  Export the support file (Ref. page 2-8)
3.  Power down the instrument (Ref. page 4-10)
4.  Turn the instrument Power on (Ref. page 4-2)
5.  If the error persists contact Technical Support

102

System runtime error

1.  Record the error message displayed on the LCD screen
2.  Export the support file (Ref. page 2-8)
3.  Power down the instrument (Ref. page 4-10)
4.  Turn the instrument Power on (Ref. page 4-2)
5.  If the error persists contact Technical Support

E2 - Centrifuge Board and Motor

Error Number

Description

Corrective Action

200

Motor/centrifuge control board error

1.  Record the error message displayed on the LCD screen
2.  Export the support file (Ref. page 2-8)
3.  Power down the instrument (Ref. page 4-10)
4.  Turn the instrument Power on (Ref. page 4-2)
5.  If the error persists contact Technical Support

201

Centrifuge control board 
communication error

1.  Record the error message displayed on the LCD screen
2.  Export the support file (Ref. page 2-8)
3.  Power down the instrument (Ref. page 4-10)
4.  Turn the instrument Power on (Ref. page 4-2)
5.  If the error persists contact Technical Support

202

Main board/centrifuge control 
board synchronization error

1.  Record the error message displayed on the LCD screen
2.  Export the support file (Ref. page 2-8)
3.  Power down the instrument (Ref. page 4-10)
4.  Turn the instrument Power on (Ref. page 4-2)
5.  If the error persists contact Technical Support

203

Centrifuge motor stop error

1.  Record the error message displayed on the LCD screen
2.  Export the support file (Ref. page 2-8)
3.  Power down the instrument (Ref. page 4-10)
4.  Turn the instrument Power on (Ref. page 4-2)
5.  If the error persists contact Technical Support

206

Centrifuge control board response 
error

1.  Record the error message displayed on the LCD screen
2.  Export the support file (Ref. page 2-8)
3.  Power down the instrument (Ref. page 4-10)
4.  Turn the instrument Power on (Ref. page 4-2)
5.  If the error persists contact Technical Support

From time to time, the QBC STAR may display an error code. A USB flash drive is included with the QBC 
STAR to download a support file of the error code (see page 2-8 for instructions on how to download the 
support file). If any of the error messages below appear, please follow the corrective action. If the error 
code is still displayed, contact Technical Support at +1-866-265-1486 (U.S. only) or; +1-814-692-7661 for 
assistance.

System Error Codes

Summary of Contents for QBC STAR


























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands