Drucker Diagnostics QBC STAR, System Operator'S Manual

Page: 23 / 89

6000-300-000 2–9
2 – Installation and Setup
Set Language
Set language lets you select from the following languages: German (Deutsch); English; Spanish
(Español); French (Français); Italian (Italiano).
When you select the option, a sub-menu titled “LANGUAGES” appears. It lists these language
selections. The arrow cursor (
) points to the item that is currently selected. (When you
first access the menu, the cursor points to the first item, Deutsch.) To select the current item,
press
on the keypad. To select another item, use the
5
or
6
key to move the arrow cursor
up or down the list. When the desired option is selected, press on the keypad.
Units
The units option allows you to select whether certain results are reported in SI units (Millimoles
per liter) or STD units (Grams per deciliter). The results that are affected are hemoglobin and
MCHC.
When “STD Units” Option 1 is selected, the status on the LCD display will be “STD Units”.
You can select SI units by using the
5
or
6
key to move the arrow cursor ( ) up or down
the list until it is pointing to option 2. Then press on the keypad. The status on the LCD
display will be “SI Units”.
Shipping Preparation
This option prepares the instrument to be physically shipped by allowing the rotor to spin
freely by retracting the actuator. After you select this option, a message will be displayed
indicating that shipping preparation has been completed. Ensure that the rotor can be freely
spinned. The instrument can now be powered off.
6000-300-000 2-9