8
The main rules of behavior to be observed for working wit a good level of safety are the following:
Installation, use, maintenance, etc. operations must always be carried out by qualified and trained personnel.
It is a good rule to always wear the personal protective equipment provide without exception.
Always carry out cleaning, adjustment and maintenance operations, making sure that all energy and
compressed air supply are disconnected.
Install the equipment away from passageways, so as to prevent it form being hit or damaged.
Don’t damage the warning sign and pictograms applied to the equipment; if they are inadvertently damaged,
immediately replace them with identical ones.
Verify the chemical compatibility of the materials with which the equipment is built with the oil you intend to
use. A wrong choice could cause, in addition to damaging the equipment and pipes, serious risks for people
(leakage of irritating and harmful products) and for the environment.
Never exceed the maximum permitted operating pressure value of the equipment and the components
connected to it. In case of doubt, consult the data shown on the appliance plate.
Use only original spare parts.
If it is necessary to replace components with others, make sure that they are suitable for operating at the
maximum working pressure of the equipment.
DropsA S.p.A. declines any responsibility for damage to person or things deriving from the improper use of the
equipment, form the tampering of its safety devices or from the non-observance of the safety rules at work.
WARNING
It is necessary to read the Use and
Maintenance Manual of the equipment to
know the risks of use
3.1. Materials present on the system
None of the materials used for the construction of the system is dangerous for the people in charge of its
management (during all phases of the system's life). Specifically, the materials used for the construction of the
machine are primarily:
iron derivatives;
plastic derivatives;
aluminium derivatives.
Materials are in accordance with the REACH and RoHS directive.
3.2 Air quality
In order to avoid mixing water in oil in the tank and/or filling of the nozzles due to impurities present in the supply
circuit itself, it is advisable to use filtered and dehumidified air according to DIN ISO 8573-1 (1.4.1).
If the equipment is used at temperatures lower than 3°C, it is necessary to use filtered and dehumidified air according
to DIN ISO 8573-1 (1.3.1).
3.3 Lubricant: MaXtreme Oil
During operation, the system has been designed to use specific products for production purposes, i.e. the lubricants
contained in the tank are used to carry out its activity. The only lubricant permitted by the manufacturer
DropsA
S.p.A.
is a non-hazardous mixture according to the agreement (EC)1272/2008 [GHS] as described on its MSDS
(Material Safety Data Sheet):
