7
3. Use safety and precautions
Before carrying out any operation it is important to read this manual. It is always recommended to respect the safety
standards of the country where the equipment is installed and the need to resort to personnel specialised In the
various maintenance, use, installation, etc. necessary during the life of the equipment.
Safety instructions and symbols are used in this manual in accordance with the ANSI Z535, ISO 3864 and ISO 7010
standards listed below:
Sumbols table
DANGER
PROHIBITION
OBLIGATION
Generic danger
Generic prohibition
Generic obligation
Laser beam danger
No smoking or use
naked flames
It is mandatory to read
the instructions
Electricity danger
No entry with
watches and metal
objects
It is mandatory to use
hearing protectors
Hot surface danger
Do not touch
It is mandatory wear eye
protection
Danger container under
pressure
It is forbidden to
switch off with water
It is mandatory to ensure
the ground connection
Danger of crushing
hands
It is mandatory to
disconnect the current
Explosive area danger
Protective glows must be
worn
Warnings table
Warning
Damage
to
Definition
Consequences
People
Indicates a dangerous situation, which,
if not avoided, death or serious injury
will certainly cause.
Death or serious injury,
paralytic
Indicates a dangerous situation, which,
if not avoided, death or serious injury
may cause.
Potential death or
serious injury
Indicates a dangerous situation, which,
if not avoided, mild or moderate injury
could cause.
Moderate and mild
injury possible
Things
Indicates unrelated practices at person
injury.
Suggestions or other infprmation.
Damage to things, not
to people
DANGER
WARNING
CAUTION
NOTICE
