13
7. UNPACKING AND INSTALLATION OF THE MACHINE
7.1 UNPACKING
Once you have identified the suitable place for installation, open the packaging and remove the equipment. Check the
unit for damage during transport and storage. The packing material does not require special disposal precautions as it
is in no way dangerous or pollutant. For disposal, refer to local regulations.
7.2 INSTALLATION
The equipment can be installed in two ways:
a)
Attach the equipment to the structure of the machine tool. Take care not to install the equipment in an
environment that is particularly prone to strong vibration or oscillation.
b)
Install the equipment in the vicinity of the machine tool, ensuring that it is a suitable environment for this
type of equipment.
Strictly follow the following rules:
In order to avoid malfunctions, always position the equipment vertically.
NEVER
turn the equipment upside down.
For filling and control of the system, place the equipment in an easily accessible environment.
NOTICE
Place the equipment on the machine
vertically and in an easily accessible location.
NEVER flip the equipment
The operator is responsible for any damage caused to the MaXtreme
equipment by improper installation.
7.2.2 COMPRESSED AIR CONNECTION
WARNING
The compressed air connection must be made by
competent and qualified personnel.
For safety reasons, the compressed air pressure at the
mains air connection must never exceed 6 bar.
Mains air
connection
