Ignis Operations Manual
Drone Amplified
Figure 4.1.5b: To lock the Dropper in place, push the emergency release lock on each side
of the dropper back
4.1.6 Dropper Needle
Dropper Needle:
A AND B CLEAR AND INSTALLED
Before each flight the needle should be removed and it should be verified that it is clear
of any foreign material and that it is sharp.
This process is identical for the Dropper A needle and the Dropper B needle.
To remove the needle assembly, push in on the black knob labeled “IGNIS” on the needle
assembly, twist it counter-clockwise until it stops, and pull it out.
Figure 4.1.6a: Location to insert the needle.
To insert the needle assembly, slide the needle into the center hole in Figure 4.1.6a. You
may need to rotate the needle assembly in order to fully insert the needle.
Last Updated
Page 32
Apr 13, 2022
