Ignis Operations Manual
Drone Amplified
●
The app status indicates dropping.
This process will perform injections on both A and B sides until stopped.
4.1.24 Stop Dropping
Stop Dropping:
DISARMED, IGNIS STOPPED
Press the Stop button in the app to stop dropping. To disarm Ignis in order to prevent
accidentally starting again, move the Arm/Disarm switch (S3) on the control bar into the
disarm position (down and away from the user), as shown in
. Further, make
sure that all motions of the system stop and that the app indicates ready. Note that the
stopping process can take 2-3 seconds while the system purges any additional ignition
spheres and performs a calibration process.
4.1.25 Check Ignis Status in App
Check Ignis Status in App:
DISARMED BY CONTROL BAR
Verify that the status message in the app’s flying screen indicates Ignis has no errors.
4.1.26 Disarm Ignis
Disarm Ignis:
DISARMED
Disarm Ignis on a M600 system by flipping the arm/disarm switch. On the Alta X and IF
1200 systems, press button C to toggle Ignis to “DISARMED”.
4.1.27 Turn off Ignis
Ignis Powered Off:
POWERED OFF
To turn Ignis off, unplug the battery.
5 Emergency Procedures
This section contains the emergency procedure checklists. See the Amplified
Emergency Procedures in Section 6 for details.
Last Updated
Page 47
Apr 13, 2022
