Edison Installation and Operation Manual
62
The convection blower needs maintenance. Carefully clean blower housing and
make sure blower louvers are not blocked.
NOTE: IF THE ERROR MESSAGE APPEARS MORE THAN THREE TIMES, THE LCD
TOUCH SCREEN SCREEN WILL LOCK ITSELF UP.
THIS PELLET STOVE IS EQUIPED WITH MULTIPLE DEVICES TO ENSURE YOUR
SAFETY. IF A WARNING ERROR MESSAGE STOPS YOUR STOVE ON SEVERAL
OCCASIONS, IT IS MORE THAN LIKELY THAT THE STOVE DOES NOT EXHAUST
PROPERLY.
Before resetting the PC-board displaying an error message,
do a
COMPLETE stove maintenance as described in this manual.
For an Overheat message
•
Service the stove COMPLETELY as described in this manual. See Section
8: Maintenance.
•
Verify the venting system and all other components mentioned above.
ONCE THE MAINTENANCE DONE AND THE VENTING SYSTEM CHECKED, FOLLOW
THESE STEPS
After 3 OVERHEAT messages press RESET and then enter the following code:
9 9 9 3 3 3 5 5 5
and press accept. The system will reset.
Summary of Contents for DP00065
