Drolet DP00065, Installation And Operation Manual

Page: 10 / 110

Edison Installation and Operation Manual
10
•
THE INFORMATION GIVEN ON THE CERTIFICATION LABEL AFFIXED TO THE
STOVE ALWAYS OVERRIDES THE INFORMATION PUBLISHED IN ANY OTHER
MEDIA (OWNER’S MANUAL, CATALOGUES, FLYERS, MAGAZINES AND/OR WEB
SITES).
•
CONNECT THIS STOVE ONLY TO A LISTED PELLET VENT FOR USE WITH SOLID
FUEL OR TO A LINED CHIMNEY CONFORMING TO NATIONAL AND LOCAL
BUILDING CODES.
•
DO NOT INSTALL A FLUE DAMPER IN THE EXHAUST VENTING SYSTEM OF
THIS UNIT.
•
DO NOT CONNECT THIS STOVE TO ANY OTHER EXISTING VENTING SYSTEM
SERVING ANOTHER APPLIANCE.
•
DO NOT CONNECT TO OR USE IN CONJUNCTION WITH ANY AIR DISTRIBUTION
DUCTWORK.
•
THE VENTING SYSTEM MUST BE COMPLETELY AIRTIGHT AND PROPERLY
INSTALLED. ALL VENT CONNECTOR JOINTS MUST BE SEALED AND
FASTENED IN ACCORDANCE WITH THE PELLET VENT MANUFACTURER'S
INSTRUCTIONS TO ENSURE CONSISTENT PERFORMANCE AND AVOID SMOKE
AND ASH SPILLAGE.
•
THE VENTING SYSTEM SHOULD BE CHECKED, AT LEAST TWICE A YEAR FOR
ANY BUILDUP OF SOOT OR CREOSOTE.
•
NEVER BLOCK ANY LOUVERS OF THE STOVE.
•
IF REQUIRED, A FRESH AIR KIT CAN BE INSTALLED TO SUPPLY COMBUSTION
AIR TO THE ROOM OR SPACE (SEE APPENDIX F: COMBUSTION AIR SUPPLY).
•
MIXING OF APPLIANCE COMPONENTS FROM DIFFERENT SOURCES OR
MODIFYING COMPONENTS IS PROHIBITED AND WILL VOID THE WARRANTY.
•
ANY MODIFICATION OF THE STOVE THAT HAS NOT BEEN APPROVED IN
WRITING BY THE TESTING AUTHORITY IS PROHIBITED AND VIOLATES CSA
B365 (CANADA), AND ANSI NFPA 211 (USA).
•
NO MODIFICATION SHOULD BE MADE TO THE AUXILIARY BATTERY SYSTEM.
•
STOVE BUILDER INTERNATIONAL INC. (SBI) GRANTS NO WARRANTY, IMPLIED
OR STATED, FOR THE POOR INSTALLATION OR LACK OF MAINTENANCE OF
YOUR STOVE AND ASSUMES NO RESPONSIBILITY OF ANY CONSEQUENTIAL
DAMAGES.