Draytek VigorAP 800, User Manual

Page: 37 / 118

VigorAP 800 User’s Guide 27
W
W
P
P
S
S
I
I
n
n
t
t
r
r
o
o
d
d
u
u
c
c
t
t
i
i
o
o
n
n
WPS (Wi-Fi Protected Setup) provides easy procedure to make network connection
between wireless station and wireless access point (VigorAP 800) with the encryption of
WPA and WPA2.
It is the simplest way to build connection between wireless network clients and VigorAP 800.
Users do not need to select any encryption mode and type any long encryption passphrase to
setup a wireless client every time. He/she only needs to press a button on wireless client, and
WPS will connect for client and VigorAP 800 automatically.
Note: Such function is available for the wireless station with WPS supported.
There are two methods to do network connection through WPS between AP and Stations:
pressing the
Start PBC button or using PIN Code .
On the side of VigorAP 800 series which served as an AP, press WPS button once on the
front panel of VigorAP 800 or click Start PBC on web configuration interface. On the side
of a station with network card installed, press Start PBC button of network card.
If you want to use PIN code, you have to know the PIN code specified in wireless client.
Then provide the PIN code of the wireless client you wish to connect to the VigorAP 800.