Draytek Vigor3900 Series User Manual Download

Page: 97 / 516

Vigor3900 Series User’s Guide

Apply

Click it to save the configuration and exit the dialog.

Cancel

Click it to exit the dialog without saving the configuration.



If you choose PPPoE as IPv4 protocol type, click the PPPoE Tab to open the
following page:

Available parameters are listed as follows:

Item Description

Username

Type the user name offered by your ISP.

Password

Type the password offered by your ISP.

MTU/MRU

Type the value of MTU/MRU. The default value is 1492.

Service Name

This is an optional setting. Some ISP will offer such
information and ask you to type the same data on this field.

Debug

Click

Enable

to display the PPPoE debug message in

Syslog. The default setting is

Disable

Always On

Enable

– Click it to enable the function of Always On. The

router will keep network connection all the time.

Disable

– Click it to disable the function of Always On.

Fixed IP

Enable

– Click it to enable the function of fixed IP.

Disable

– Click it to disable the function of fixed IP.

Fixed IP Address

Type the IP address in the boxes.

Connection
Detection Mode

Select a detecting mode for this WAN interface. There are
two ways

PING

and

HTTP

supported in Vigor router for

you to choose to send the request out.

VoIPon www.voipon.co.uk [email protected] Tel: (0)330 088 0195 Fax: +44 (0)1245 808299

Summary of Contents for Vigor3900 Series





































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vigor3900 Series

Reviews:

Related manuals for Vigor3900 Series

Brands by name

Popular brands

Draytek Vigor3900 Series, User Manual

Search results

Summary of Contents for Vigor3900 Series

Reviews:

Related manuals for Vigor3900 Series

Brands by name

Popular brands