Draytek Vigor3900 Series User Manual Download Page 474

Page: 474 / 516

Vigor3900 Series User’s Guide

466

router and the client might not be guaranteed.

Refresh

– Click it to refresh current page.

Profile

– Display of the profile used now.

Device

– Display the name of the CPE connected to Vigor

router via VPN.

Name

– Display

the name (can be modified by the

administrator) of the device. Refer to 4.11.2.1 CPE
Maintenance for detailed information.

Connected Devices

Once the VPN is established successfully, the basic
information such as the connection type, IP address, RX/RX
will be displayed on this field.

Refresh

– Click it to refresh current page.

VPN –

Display

the name of the VPN.

Type –

Display the type of the connection mode.

Interface

– Display the WAN interface.

Remote IP –

Display the IP address of the remote end.

Virtual Network –

Display the IP address of Vigor3900.

Up Time –

Display the connection time of such VPN.

RX(Packets) /TX(Packets) –

Display the number of the

packets exchanged in such VPN.

Disconnect –

Click it to disconnect the VPN.

VoIPon www.voipon.co.uk [email protected] Tel: (0)330 088 0195 Fax: +44 (0)1245 808299

Summary of Contents for Vigor3900 Series





































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vigor3900 Series

Reviews:

Related manuals for Vigor3900 Series

Brands by name

Popular brands

Draytek Vigor3900 Series, User Manual

Search results

Summary of Contents for Vigor3900 Series

Reviews:

Related manuals for Vigor3900 Series

Brands by name

Popular brands