Draytek Vigor 2130 Series, User Manual, Page: 70 / 353

Vigor2130 Series User’s Guide 60
Protocol Specify the transport layer protocol. It could be TCP , UDP
and TCP+UDP .
WAN IP Specify one WAN IP address to be used by such profile. The
default setting is ALL, which mean such profile can be
applied for all the WAN IP addresses.
Start Port Specify the starting port number of the service offered by the
local host.
End Port (optional) Specify the ending port number of the service offered by the
local host.
Local Host Enter the private IP address of the local host.
Local Port (optional) If it is configured, the forwarded traffic is mapped to this
port on the local host.
Click OK to save the settings.