Draytek Vigor 2130 Series, User Manual, Page: 325 / 353

Vigor2130 Series User’s Guide 315
5. Setup a pre-shared key , which must be the same as in Vigor2820.
6. Setup the Local Identity and Remote Identity , which are for Vigor2130 and Vigor2820
respectively.
During IPSec Aggressive mode negotiation, the VPN client must send its identity to the
VPN server for verification. The VPN client may also verify the identity of the VPN
server, which is optional. In this example we setup ‘vigor2130’ as the identity of
Vigor2130, and ‘vigor2820’ as the identity of Vigor2820.
7. Enter Vigor2130’s private network in the Local Network / Mask field. Enter
Vigor2820’s private network in the Remote Network / Mask field.
8. Use default value “Automatic” for IKE phase 1 and phase 2 proposals .
9. Click OK .
10. Accessing the VPN network of Vigor2820 from a PC behind Vigor2130 to initiate the
VPN connection, for example, ping 192.168.1.x from a PC (192.168.30.x). Vigor2130
will be triggered to dial the IPSec VPN to Vigor2820. After the VPN is connected, you
can monitor the status.