Vigor2130 Series User’s Guide
49
DHCP server for your network so it automatically dispatch
related IP settings to any local user configured as a DHCP
client. It is highly recommended that you leave the router
enabled as a DHCP server if you do not have a DHCP server
for your network.
You can configure the router to serve as a DHCP server for
the 2nd subnet. Check the box to enable DHCP server
setting.
Start IP Address
Enter a value of the IP address pool for the DHCP server to
start with when issuing IP addresses. If the 2nd IP address of
your router is 220.135.240.1, the starting IP address must be
220.135.240.2 or greater, but smaller than 220.135.240.254.
IP Pool Counts
Enter the number of IP addresses in the pool. The maximum
is 10. For example, if you type 3 and the 2nd IP address of
your router is 220.135.240.1, the range of IP address by the
DHCP server will be from 220.135.240.2 to 220.135.240.11.
Lease Time
It allows you to set the leased time for the specified PC.
Force DNS manual setting
Enable
- Force router to use DNS servers in this page
instead of DNS servers given by the Internet Access server
(PPPoE, PPTP, L2TP or DHCP server).
Primary IP Address
You must specify a DNS server IP address here because your
ISP should provide you with usually more than one DNS
Server. If your ISP does not provide it, the router will
automatically apply default DNS Server IP address:
194.109.6.66 to this field.
Secondary IP Address
You can specify secondary DNS server IP address here
because your ISP often provides you more than one DNS
Server. If your ISP does not provide it, the router will
automatically apply default secondary DNS Server IP
address: 194.98.0.1 to this field.
The default DNS Server IP address can be found via Online
Status.
If both the Primary IP and Secondary IP Address fields are
left empty, the router will assign its own IP address to local
users as a DNS proxy server and maintain a DNS cache.
If the IP address of a domain name is already in the DNS
cache, the router will resolve the domain name immediately.
Otherwise, the router forwards the DNS query packet to the
external DNS server by establishing a WAN (e.g.
DSL/Cable) connection.
After finishing all the settings here, please click
OK
to activate them.
Summary of Contents for Vigor 2130 Series
Page 1: ......
Page 10: ......
Page 190: ...Vigor2130 Series User s Guide 180 Click OK to save the settings...
Page 342: ...Vigor2130 Series User s Guide 332 This page is left blank...