Draytek Vigor 2130 Series, User Manual, Page: 182 / 353

Vigor2130 Series User’s Guide 172
4 4 . . 2 2 . . 7 7 B B i i n n d d I I P P t t o o M M A A C C
This function is used to bind the IP and MAC address in LAN to have a strengthening control
in network. When this function is enabled, all the assigned IP and MAC address binding
together cannot be changed. If you modified the binding IP or MAC address, it might cause
you not access into the Internet.
Click LAN and click Bind IP to MAC to open the setup page.
Enable Click this radio button to invoke this function. However,
IP/MAC which is not listed in IP Bind List also can connect
to Internet.
Disable Click this radio button to disable this function. All the
settings on this page will be invalid.
Strict Bind Click this radio button to block the connection of the
IP/MAC which is not listed in IP Bind List.
ARP Table This table is the LAN ARP table of this router. The
information for IP and MAC will be displayed in this field.
Each pair of IP and MAC address listed in ARP table can be
selected and added to IP Bind List by clicking
Add below
.
Add and Edit IP Address
–
Type the IP address that will be used for the
specified MAC address.
Mac Address
–
Type the MAC address that is used to bind
with the assigned IP address.
Refresh It is used to refresh the ARP table. When there is one new
PC added to the LAN, you can click this link to obtain the
newly ARP table information.
IP Bind List It displays a list for the IP bind to MAC information.