Draytek Vigor 2130 Series, User Manual, Page: 303 / 353

Vigor2130 Series User’s Guide 293
4 4 . . 1 1 5 5 . . 2 2 R R o o u u t t i i n n g g T T a a b b l l e e
Click Diagnostics and click Routing Table to open the web page.
Destination Display the IP address for destination network or destination
host.
Gateway Display the gateway address or “*” if none set.
Genmask
Display
the netmask for the destination net;
'255.255.255.255' is for a host destination and '0.0.0.0' is for
the default route.
Flags Different codes represent different routing status.
U - route is up.
H - target is a host
G - use gateway
R - reinstate route for dynamic routing
D - dynamically installed by daemon or redirect
M - modified from routing daemon or redirect
A - installed by addrconf
C - cache entry
! - reject route
Metric Display the distance to the target (usually counted in hops).
Ref
Display number of references to this route. (Not used in the
Linux kernel.)
Use Display count of lookups for the route. Depending on the
use of -F and –C, this will be either route cache misses (-F)
or hits (-C).
Iface Display interface to which packets for this route will be sent.
Refresh Click it to reload the page.