Draytek Vigor 2130 Series, User Manual, Page: 178 / 353

Vigor2130 Series User’s Guide 168
mechanism, only support static MAC address setting.
Secure - Disable this port MAC address dynamic learning
mechanism and copy the dynamic learning packets to CPU.
Static MAC Table Config.. Specify static MAC address with VLAN ID to apply aging
configuration.
Delete - Click the button to remove the VLAN setting.
VLAN ID - Specify the interface for the port members.
MAC Address - It is a six-byte long Ethernet hardware
address and usually expressed by hex and separated by
hyphens. For example, 00 – 40 - C7 - D6 – 00 – 02.
WAN/LAN1~4 - Check the port to apply this VLAN setting.
To add a new static MAC entry, click Add new static entry . A new entry will be shown as
follows. Choose a VLAN ID and type a new MAC address. Next, specify port member for
this table. Finally, click OK to save the changes.
4
4
.
.
2
2
.
.
4
4
V
V
L
L
A
A
N
N
Virtual LAN function provides you a very convenient way to manage hosts by grouping them
based on the physical port. You can also manage the in/out rate of each port. Go to
LAN page
and select VLAN . The following page will appear. VLAN function is enabled in default.
Add New Private VLAN Click this button to add a new private VLAN. The router allows
you to add up to 4 VLAN.