Draytek Vigor 2130 Series, User Manual, Page: 293 / 353

Vigor2130 Series User’s Guide 283
4 4 . . 1 1 4 4 . . 2 2 T T R R - - 0 0 6 6 9 9
Vigor router with TR-069 is available for matching with VigorACS server. Such page
provides VigorACS and CPE settings under TR-069 protocol. All the settings configured here
is for CPE to be controlled and managed with VigorACS server. Users need to type URL,
username and password for the VigorACS server that such device will be connected. However
URL, username and password under CPE client are fixed that users cannot change it. The
default CPE username and password are "vigor" and "password". You will need it when you
configure VigorACS server.
ACS Settings
Such data must be typed according to the ACS (
Auto
Configuration Server) you want to link. Please refer
to VigorACS user’s manual for detailed information.
URL - Type the URL for VigorACS server.
If the connected CPE needs to be authenticated, please
set URL as the following and type username and
password for VigorACS server:
http://{IP address of
VigorACS}:8080/ACSServer/services/ACSServlet
If the connected CPE does not need to be authenticated
please set URL as the following:
http://{IP address of
VigorACS}:8080/ACSServer/services/UnAuthACSServ
let
Username/Password - Type username and password for
ACS Server for authentication. For example, if you want
to use such CPE with VigorACS, you can type as the
following:
Username: acs
Password: password
CPE Settings Such information is useful for Auto Configuration